Mitel 5614 DECT Phone User Manual for MiVB
SELECT A BLUETOOTH HEADSET
To activate a Bluetooth headset, do as follows:
1. Enter in the handset menu and select “Bluetooth” > “Headset”.
2. Select a headset by pressing up or down on the navigation key.
3. Press the soft key "Select". "Connection successful" is displayed. The headset is now
selected.
When a new headset has been selected any previous headset is disconnected
automatically.
REMOVE A HEADSET
To remove a Bluetooth headset, do as follows:
1. Enter in the handset menu and select “Bluetooth” > “Headset”.
2. Select a headset by pressing up or down on the navigation key.
3. Press the soft key "More".
4. Select "Delete" and confirm with the soft key "Yes".
CHANGE THE NAME OF BLUETOOTH HEADSET
The name, in the headset list, of the headset is the default name for the headset. To change
the name, do as follows:
1. Enter in the handset menu and select “Bluetooth” > “Headset”.
2. Select a headset by pressing up or down on the navigation key.
3. Press the soft key "More".
4. Select "Edit name". Enter a name, see “Alphanumeric Keys” on page 16.
CALLING
MAKE A CALL
Dial the number on the handset and press the soft key "Call", or the Off-hook key. When “Transfer
call to phone?” is displayed press "No" or ignore the message to use the Bluetooth Headset.
Press "Yes" to use the handset.
ANSWER A CALL
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an
incoming call.
To answer the call in the Bluetooth headset, press the button on the headset.
To answer the call in the handset press the Off-hook key on the handset.
To Next Page
Loading...
