Mitel 5614 DECT Phone User Manual for MiVB
1. Press the soft key "More" during the call.
2. Select "Transf. to new".
3. Press "Select".
4. Enter the number of the person where the ongoing call is to be transferred or press to
access the phonebook.
5. Press to transfer the call. Your call is disconnected automatically.
CONFERENCE CALL
Prerequisite, a new call has been started during conversation, see Start a New Call during
Conversation on page 38.
By initiate a conference call, an conversation can be made between several participants
simultaneously.
1. Press the soft key "More".
2. Select "Conference".
3. Press "Select".
The person initiating the conference call is the conference leader, and the other are participant
members of the conference call.
CALL BACK
When a call is made to a busy handset, an automatically call back can be made when the busy
handset is free.
When a busy tone sounds, do as follows:
1. Press the soft key "More" during the call.
2. Select "Call back".
3. Press "Select".
4. Press and wait until the handset alerts.
5. When the handset alerts, press . The call is started automatically.
Note: This option is only visible when the parameters "New call" and "Transfer" are
defined in the handset. For more information, refer to the Configuration Manual for the
handset; see Related Documents on page 127.
Note: This option is only visible if configured in the handset. For more information, refer
to the Configuration Manual for the handset; see Related Documents on page 127.
Note: This option is only visible if configured in the handset.
To Next Page
Loading...
