DURING A CALL
When calling from a locked handset, there are limitations to what items in the In Call menu are
visible. However, the entire menu is accessible when calling from a handset with locked keypad.
ADJUST THE VOLUME DURING A CALL
Press the "Volume up" button to increase the volume, and the "Volume down" button to decrease
the volume. The handset stores and keeps the new volume level. The navigation key can also
be used to adjust the volume (press up or down on the navigation key).
OPEN CONTACTS DURING THE CALL
1. Press the soft key "More" during the call.
2. Select "Contacts".
3. Press "Select".
4. Select "Call contact" for searching a local or company phonebook contact, or select "Central
phonebook" for searching a central phonebook contact.
5. Press "Select".
6. Select or search contact.
OPEN MESSAGING MENU DURING A CALL
The Messaging menu can be accessed during an ongoing call by pressing the soft key "More".
1. Press the soft key "More" during the call.
2. Select "Messaging".
See Chapter 8 Messaging on page 55 for more information about messaging.
TURN THE MICROPHONE ON OR OFF DURING A CALL
1. Press the soft key "More" during the call.
2. Select "Microphone off".
3. Press "Select".
The icon indicates a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
4. Press the soft key "More" during the call.
5. Select "Microphone on".
6. Press "Select".
Note: Some of these functions are system dependent. The parameters are set up in the
WinPDM/Device Manager, refer to the Configuration Manual for the handset; see Related
Documents on page 127.
Note: The selected contact can be called by pressing "Call". When calling the contact,
the first call is put on hold. See also 5.4.7 Start a New Call during Conversation on page 29
To Next Page
Loading...
