Mitel 5614 DECT Phone User Manual for MiVB
3. Write the message from scratch or select a message template by pressing the "More" soft
key and, if required, edit the message as described in The Templates Menu on page 59.
Note: The "More" key is not displayed if no message templates have been defined.
4. When the message is complete, press "Send".
5. Enter the call number.
6. Press "Send" to send the message.
OPEN A SENT MESSAGE
1. Enter “Messaging” menu, see Messaging on page 23.
2. Select “Sent”.
3. Select message.
4. Press "View" to read the message.
SEND TO ANOTHER DESTINATION
1. Enter “Messaging” menu, see Messaging on page 23.
2. Select “Inbox” or "Sent".
3. Select message.
4. Press "More".
5. Select "Forward".
6. Press "Send".
7. Enter the number.
8. Press "Send".
REVIEW INBOX CONTENT WHILE READING A MESSAGE
To review the content of the inbox while reading a received message, perform the following
steps:
1. Press the "More" soft key
2. From the pop-up menu, select “Inbox”. The message summaries contained in the inbox
are displayed.
3. To return to the message previously being read, press the "Back" soft key.
To Next Page
Loading...
