Mitel 5614 - Audio Transfer; Lock and Unlock the Keypad During a Call; Start a New Call During Conversation

Mitel 5614 DECT Phone User Manual for MiVB
38
The microphone can be turned off and on by a long press on or .
When long pressing or pressing , a short beep is also heard indicating that the
microphone is turned on or off. When pressing in a PTT call, no beep is heard.
LOCK AND UNLOCK THE KEYPAD DURING A CALL
To prevent accidentally pressing keys, the keys can be locked during a call. This can be useful
when a headset is used and the handset is attached to a pocket or belt.
Lock keypad
1. Long press .
2. Press "Lock".
Unlock keypad
1. Press
2. Press "Yes".
AUDIO TRANSFER
To transfer audio between the Bluetooth headset and the handset’s earpiece.
1. Press the soft key "More" during the call.
2. Select "Audio transfer".
3. Press "Select".
START A NEW CALL DURING CONVERSATION
1. Press the soft key "More" during the call.
2. Select "New Call".
3. Press "Select".
4. Enter number, or press to access the phonebook.
5. Press .
Note: When the keypad is locked, the volume buttons and the mute button can be
pressed during the call. Depending on model of handset, the Alarm button can also be
pressed. For information about what functions that are supported by existing handset
models, see Functions and Accessories on page 3.
Note: This option is only visible if a Bluetooth connection is active.
Note: This option is only visible if configured in the handset. For more information, refer
to the Configuration Manual for the handset; see Related Documents on page 127.