Mitel 5614 DECT Phone User Manual for MiVB
TIP: When searching for a contact, the input language can be temporarily changed by long
pressing . This can be used to temporarily access characters in a foreign language.
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, see Contacts on page 21.
CALL CONTACT
1 Select "Call contact".
2 Select contact from the list, or enter name or number in the search field.
3 Press the Soft key "Call".
The contact can also be edited and a message sent by selecting "View" > "More".
ADD CONTACT
1 Select "Add contact".
Add New Contact
1 Select "New".
2 Select "Add", and enter the name of the contact.
3 Press "OK".
4 Select "Work Number"/"Mobile number"/"Other number".
5 Press "Add".
6 Enter handset numbers.
Tip: A variable or the character U can be added to the Work/Mobile/Other number field to
allow the user to enter additional numerical characters before calling the number. See
Chapter 11 Procedure Call on page 101 for more information.
7 Press "OK".
8 Press "Save".
NOTE: A specific ring signal can be set for each contact, see Edit Contact on page 92
Add from Call List
1 Select "From call list".
2 Select number.
3 Press "Add".
4 Select number type.
5 Press "Select".
6 Press "Add", and enter name for the contact.
7 Press "OK".
8 Press "Save".
NOTE: A specific ring signal can be set for each contact, see Edit Contact on page 92
To Next Page
Loading...
