EasyManua.ls Logo

Mitel 5614 - Calling Features and Volume Control

Mitel 5614
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
10. Press "OK". A searching mode starts.
Unsubscribe System
1. Enter the menu by pressing the “Menu” soft key.
2. Select in the menu.
3. Select "System".
4. Select "Unsubscribe".
5. Select the system to unsubscribe.
6. Press "Yes to unsubscribe the system.
Rename System
The name of the system can be changed in the in the handset by performing these steps:
1. Select "Rename system".
2. Select system to rename and press the "Edit" soft key.
3. In the "Name" field, enter new name.
4. Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. The priority of a
system can be modified by moving it up or down in the list.
NOTE: This is used in combination with system set to be "Automatic", see Change System on
page 75.
1. Select "Priority".
2. Change the priority if needed by selecting "Up" or "Down". The priority is saved when "Back"
is selected.
IN CHARGER ACTION WHEN IN CALL
The behaviour of the handset placed in charger during a call can be set in one of the following
ways:
1. Select "In charger".
2. Select "Call behavior".
3. Select one of the following:
No action - no action is performed when handset is placed in charger during a call.
Loudspeaking - The loudspeaker is activated when handset is placed in charger during
a call.
End call - The call is disconnected when handset is placed in charger.

Table of Contents

Other manuals for Mitel 5614

Related product manuals