Mitel 5614 DECT Phone User Manual for MiVB
SETTINGS
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, see Settings on page 26.
SOUND AND ALERT SETTINGS
Adjust the Ring Volume
1 Select "Sound & Alerts.
2 Select “Volume”.
3 To increase the volume, press right on the navigation key. To decrease the volume, press
left on the navigation key. Press Back to save the setting.
NOTE: If a handset restriction is enabled, it might not be possible to set the ring volume to
"Silent". refer to the Configuration Manual for the handset; see Related Documents on page 127.
Set different Ring Signals for Calls
1 Select “Sound & Alerts”.
2 Select “Ring signals”.
Different signals for internal calls, external calls and call back can be set.
3 Select "Internal call", "External call", "Callback" or "PTT". The handset has 14 different
ring signals.
4 Select sound. To listen to the different sounds, press "Play".
NOTE: Additional ring signals might be selectable if them are configured via WinPDM. For more
information, refer to the Configuration Manual for the handset; see Related Documents on page
127.
5 Press "Back".
Set Alerts for Messages
1 Select “Message alert”. Different message alerts can be selected. The handset has 8
different message alerts by default, see Settings on page 26.
2 Select message alert from list. Press "Play" to listen to the different sounds.
TIP: The option Custom sounds should be selected to create a customized message alert.
For more information, refer to the Configuration Manual for the handset; see Related
Documents on page 127.
NOTE: The "Play" soft key is not available for Enhanced beep and Custom sound. Instead,
send a message to the handset to listen to the sound.
3 Press "Back".
TIP: By default, the message volume follows the ring volume setting. However, a different
message volume can be set if required. refer to the Configuration Manual for the handset; see
Related Documents on page 127.
To Next Page
Loading...
