You can also use these features by pressing the "R" key on the handset during a call. The
following table lists the In-Call menu features and associated feature access code methods.
HOLD
1. Press the "More" soft key.
2. Select "Hold/Retrieve" to put the call on hold.
RETRIEVE A HELD CALL
1. Press "More".
2. Select "Hold/Retrieve" to retrieve the call.
TRANSFER
1. Press "More".
2. Select "New Call".
3. Dial the number to which you want to transfer the call and then press "Call".
4. Do one of the following:
• to make a blind transfer, select "Release" to hang up and connect the other two parties.
• to make a supervised transfer, wait for an answer, announce the transfer, and then
select "Release" to hang up and connect the other two parties.
• to terminate the transfer and return to the held call, press "More" and then select "Call
Swap".
CONFERENCE
To conference in another party while on a call:
1. Press "More"
2. Select "New Call" to put the current call on hold.
3. Dial the number of the third party.
IN-CALL MENU UNDER MORE ASSOCIATED FEATURE ACCESS CODE
Contacts
Microphone off
New Call R
Hold/Retrieve R
Release R4
Call Swap R2
Join RR + *80
Call Back 5
Answer Call Waiting R2
Call Park RR + *7#
To Next Page
Loading...
