Mitel 5614 DECT Phone User Manual for MiVB
5. Select "Call sender".
CALL A NUMBER INCLUDED IN A MESSAGE
If the sender has written a number in the message, the number can be called without dialling.
This option is only visible if the number consists of minimum 3 digits.
1. Select "View".
2. Do one of the following:
• Press "More" and select "Call no. in text".
• Press .
3. If the message contains several numbers, select the number to be called from the list.
4. Press "Call", or .
SAVE NUMBER
1. Enter “Messaging” in the menu, see Messaging on page 23.
2. Select "Inbox".
3. Select message .
4. Select "View".
5. Press "More".
6. Select "Save number".
7. Select "Work number", "Mobile number", or "Other number".
8. Add name and press "OK".
9. Press "Save". The number is saved in the contact list.
MESSAGE TEMPLATES
Predefined messages contained in message templates can be used in a number of different
situations to quickly construct a message rather than having to construct the message
completely from scratch.
Up to five predefined messages can be configured for the handset in the WinPDM/Device
Manager. This lets the user select and send a message appropriate to the current situation,
such as "I am in a meeting" or "I am in the operating theatre".
How to use the WinPDM/Device Manager to create store predefined messages the handset is
described in the Message Templates section of the Configuration Manual for the handset; see
Related Documents on page 127).
Before a message is sent, the user may edit, add, or remove text from the message. For
example, the message "I am in a meeting" could be appended with " - please call back after
1500".
The message template function can be used in the following contexts:
To Next Page
Loading...
