THE DECT HANDSET
Case
The plastic cover parts are made of durable PC/ABS material.
Antenna
The antenna is integrated inside the handset.
Loudspeaker
The handset has a separate loudspeaker for the loudspeaking function. It is placed on the back
side of the handset.
Microphone
The microphone is placed on the front bottom side of the handset.
Clip
There are two different belt clip options to the handset; a hinge-type clip (standard), and a
swivel-type clip. See Attach the Hinge-type Clip on page 123, or Attach the Swivel-type Clip on
9 Voicemail access
A quick access to the handset’s Voicemail. This is a system dependent feature.
10 Key lock and Upper/Lower case
Combined key lock and Upper/Lower Case
11 Microphone
12 Space
To add space between text
13 Sound off key
To turn on/off audible signals in idle mode, silencing the ring signal at incoming call, and
to turn on/off the microphone during a call.
14 Tactile indicators
There are two tactile indicators to indicate the centre of the key pad
15 End and On/Off key
Combined button; to end a call, to return to standby mode, and to switch the handset
on/off by long press.
16 Color display
The full graphic type display is a 1.77 inch TFT. The display has multiple colors and
backlighting.
17 Headset connector
The headset connector is for connecting a headset. The connector is protected against
dust by using the headset connector cover.
CAUTION: The handset may retain small metal objects around the mouthcap or earcap region.
To Next Page
Loading...
