Mitel 5614 DECT Phone User Manual for MiVB
ADMIN MENU
The handset has a hidden menu for system administrators. refer to the Configuration Manual
for the handset; see Related Documents on page 127.
The Admin menu contains:
• Software and hardware information, license information, IPEI/IPDI, and User ID
• DECT link and system information
• DECT location information. NOTE: The support for this feature is dependent on what model
of handset that is used. For more information, see Functions and Accessories on page 3.
• Centralized Management status
• Site survey tool
• Fault logging
• Enhanced system menu with ability to alter protection
• Frequency band selection (this option is removed when the frequency band has been
selected)
• Factory reset option
For quick access to the Device Information (DI) menu in idle mode, press the keys containing
*#DI# (that is *#34# ). For quick access to the IPEI/IPDI, press *#06# in idle mode. refer to the
table below.
CLEAR LISTS IN CHARGER
A parameter can be set via the WinPDM/Device Manager to clear message and call lists stored
in the handset. When the parameter is activated and the function has been downloaded to the
handset, the lists are deleted when the handset is placed in a charger. This can be useful during
administration of handsets for new users. See also the Configuration Manual for the handset;
see Related Documents on page 127).
INFORMATION CODE
Software version *#34#
Hardware version *#34#
License information *#34#
IPEI/IPDI *#34# or *#06#
User ID *#34#
To Next Page
Loading...
