Mitel 5614 DECT Phone User Manual for MiVB
2. From the pop-up menu, navigate to the "Call" menu item and press the "Select" soft key.
The pre-dial screen is displayed. Enter the number of the party to be called or select a
number from the handset call list or local or central phone books.
3. Press the "Call" soft key and wait for the called party to reply. The message is replaced by
the ongoing call detail. The user may now:
• Continue with the call without referring back to the received message.
• Redisplay the message and continue the call to further review and discuss the mes-
sage. See Redisplay the Message and Continue with the Call on page 66.
• Redisplay the message and terminate the call. See Redisplay the Message and Terminate
the Call on page 66.
Redisplay the Message and Continue with the Call
1. To redisplay the message while the call is ongoing, select the "More" soft key.
2. From the pop-up menu, select "Messaging".
3. From the Messaging menu, select "Inbox". The received message summary is displayed.
4. Press the "View" soft key to display the message in full. If required, use the four-way
navigation key to scroll up and down a long text message to reveal the content while
reviewing and discussing the message with the called party.
Redisplay the Message and Terminate the Call
1. Press . The call is terminated and the ongoing call summary details are replaced by the
redisplayed text message.
MOBILE DATA
SEND MOBILE DATA
User entered data can be sent from the handset by pressing a pre-programmed Hot key or Soft
key, or selecting a Service. Mobile data can be used for opening a door, starting/stopping a
machine etc. The data can either be predefined, or entered after the Hot key/Soft key is pressed
or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see Define Soft
Keys on page 85, Define Hot Keys on page 85, or Add Services on page 87.
SEND MOBILE DATA WITH A PREFIX
Mobile data with a prefix is sent from the handset by entering data and then pressing a
pre-programmed Hot key or Soft key or select a Service. Mobile data with prefix can be used
to send information to an application in the system.
The prefix is predefined by the user when programming the Hot/Soft key or Service, Define
Soft Keys on page 85 on page 46 or Define Hot Keys on page 85.
Note: The support for this system dependent feature is dependent on what model of
handset that is used. For more information, see Functions and Accessories on page 3.
To Next Page
Loading...
