Mitel 5614 DECT Phone User Manual for MiVB
MISSED CALLS
When a missed call dialog window is shown, the user can view the missed calls by pressing
"Yes". If the user presses "No", the missed calls can be viewed as follows:
1 Enter the menu by pressing the “Menu” soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, and press the confirmation button or the Soft key "Select".
3 Select "Missed calls". To scroll in the list, press up and down on the navigation key.
4 Press the Soft key "Call" to call back.
As in Call List there is a Soft key "More" which can be used to view the time/date of the call,
edit the received number, add to contacts, delete received numbers. See Call List on page 78
for information about the functionality in Soft key "More".
NOTE: If supported by the system, the number’s contact name can be displayed in the call list.
CALL TIME
The total time of the previous call and last call is displayed.
1 Select "Call time".
PUSH TO TALK
NOTE: The support for this feature is dependent on what model of handset that is used. For more
information, see Functions and Accessories on page 3.
The push-to-talk (PTT) function can be described as a group or conference call to a predefined
group of members. If one of the group members wants to get in contact with the others, he or she
presses and holds the PTT button to open the microphone.
NOTE: The Multifunction button may also be configured to serve as the PTT button. This makes
it easier for users who may have to wear gloves because of dress or other requirements. Because
the multifunction button is larger than the PTT button and found on top of the handset, it is easier
to locate and use compared to the smaller PTT button at the side of the handset.
The support for Multifunction button is dependent on what model of handset that is used. For
more information, see Functions and Accessories on page 3.
NOTE: Some legacy systems/PBXs require that the handset sends a predefined DTMF tone when
pressing/releasing . For more information, refer to the Configuration Manual for the handset;
see Related Documents on page 127.
To participate in the conference, the group members must first accept an invitation received as an
incoming call or as a text message. See Accept an Invitation on page 80.
If a member declines an invitation, he or she can re-join the group or conference later on. See
Re-join a Group on page 83.
Note: The dialog window that appears for a missed call can be turned off. The handset
can also be prevented from storing calls in the call list. The latter feature can for example
be used to ensure privacy for users sharing the same handset. These features require
configuration in the handset via WinPDM/Device Manager
To Next Page
Loading...
