• The handset is configured to answer invitations automatically
• The invitation is of higher priority than the call priority
• The user does not reject the invitation within 10 seconds
When the invitation is received, a warning signal notifies the user before disconnecting the
current call in order to connect the PTT call.
NOTE: Depending on the priority of the invitation, the ongoing call might be disconnected
immediately or after 10 seconds.
If the user rejects the invitation, it can be re-joined later on, see Re-join a Group on page 83.
DECLINE A PTT INVITATION
Decline Invitation Received as Incoming Call
Press “Decline”, or to reject a PTT invitation. The handset returns to the previously shown
screen. See also Re-join a Group on page 83.
Decline Invitation Received as Message
Press "Reject" to reject the invitation. The handset returns to the previously shown screen. See
also Re-join a Group on page 83 for more information.
CALL A PTT GROUP
NOTE: This option is only visible when PTT group(s) is defined, For more information, refer to
the Configuration Manual for the handset; see Related Documents on page 127.
1 Press "Menu".
2 Select in the menu.
3 Select "PTT groups".
4 Select PTT group.
5 Press "Call", or .
Tip: Alternatively, when in idle mode, press quickly, select PTT group, and then press .
RE-JOIN A GROUP
Re-join a Group from Call List
If a PTT invitation was received as a call and the user rejected or missed it, the PTT group can be
dialed from the Call list or Missed calls, respectively. The PTT invitation is indicated by
the icon in the list. See Call List on page 78, or Missed Calls on page 79.
Re-join a Group from Messaging Inbox
If an PTT invitation was received as a text message and then rejected, the PTT group can be
dialed by selecting the message indicated by the icon in the Messaging inbox, and then press
the soft key "Call". See figure 4 on page 82.
To Next Page
Loading...
