Mitsubishi Electric MELSEC iQ-R16MTCPU - Connection of SSCNETIII;H Head Module; System Configuration

198
5 FUNCTIONS USED WITH SSCNET COMMUNICATION
5.6 Connection of SSCNETIII/H Head Module
5.6 Connection of SSCNETIII/H Head Module
The MELSEC-L series SSCNET/H head module (LJ72MS15) can be connected to the Motion CPU module.
System configuration
A system configuration that uses SSCNET/H head modules is shown below.
The parameters of the SSCNET/H head module and modules mounted to the SSCNET/H head module
are set using GX Works2. Refer to the following for details of the SSCNET/H head module.
MELSEC-L SSCNETIII/H Head Module User's Manual
SSCNETµ/H head module
LJ72MS15
SSCNETµ/H
Servo amplifier
MR-J4(W)-B
SSCNETµ/H
head module
LJ72MS15
SSCNETµ/H
R64MTCPU: 2 lines (Up to 64 axes
(Up to 32 axes/line))
R32MTCPU: 2 lines (Up to 32 axes
(Up to 16 axes/line))
R16MTCPU: 1 line (Up to 16 axes)
R64MTCPU: 2 lines (Up to 8 stations
(Up to 4 stations/line))
R32MTCPU: 2 lines (Up to 8 stations
(Up to 4 stations/line))
R16MTCPU: 1 line (Up to 4 stations)
Servo amplifier
MR-J4(W)-B
I/O module,
intelligent function
module
GX Works2
MT Developer2
Motion CPU module
RMTCPU