Mitsubishi Electric MELSEC iQ-R16MTCPU - Add-On License Error Details Codes

APPENDICES
Appendix 1 Error Codes
421
A
Add-on license error details codes
The detail codes for when an add-on license error is detected are shown below.
Detailed information 1
■Add-on license warning (warning (error code: 0EF1H))
The details codes for when add-on license warning (warning (error code: 0EF1H)) is detected are shown below.
■Add-on license minor error (minor error (error code: 1FF1H)), add-on license moderate error
(moderate error (error code: 3081H))
The details codes for when add-on license minor error (minor error (error code: 1FF1H)), and add-on license moderate error
(moderate error (error code: 3081H)) are detected are shown below.
3C30H Memory error An error has been detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and run it again. If the same
error code is displayed again, the possible cause is a
hardware failure of the CPU module. Please consult
your local Mitsubishi representative.
3C31H Memory error An error has been detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and run it again. If the same
error code is displayed again, the possible cause is a
hardware failure of the CPU module. Please consult
your local Mitsubishi representative.
3C32H Memory error An error has been detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and run it again. If the same
error code is displayed again, the possible cause is a
hardware failure of the CPU module. Please consult
your local Mitsubishi representative.
Details code Description Error details and cause Corrective action
0101H License authentication
incomplete
• An add-on library with license authentication
incomplete is being used.
• When the license period (trial period) is exceeded,
the add-on library can no longer be used.
• Purchase a license, and write it to the Motion
CPU.
• The model and serial No. of the license key written
to the Motion CPU is incorrect. Create a license
key with the correct model and serial No., and
write it to the Motion CPU.
0102H License period expired
warning
License period expiration was detected. The next
time power supply is turned ON, a license expiration
error (details code: 0111H) occurs.
Purchase a license, and write it to the Motion CPU.
Details code Description Error details and cause Corrective action
0111H License period expired License period expiration was detected. • Purchase a license, and write it to the Motion
CPU.
• Delete add-on libraries that are being trialed, but
are not needed.
0112H Number of licenses
exceeded
The number of add-on libraries for license
authentication has been exceeded.
• Purchase a license, and write it to the Motion
CPU.
• Delete the add-on libraries that are not needed.
• Clear the built-in memory.
0113H License not registered At the license check, the license key file or the
corresponding add-on library for the license key was
not found.
• Purchase a license, and write it to the Motion
CPU.
• Delete the add-on libraries that are not needed.
0121H License file load error
(license key data error)
When loading the license key file, abnormal license
key data was detected.
Write the license key to the Motion CPU.
0123H License period data error The license period data is corrupted. Clear the built-in memory.
Error
code
Error name Error details and cause Corrective action