Mitsubishi Electric MELSEC iQ-R16MTCPU - Installation Procedure Using MT Developer2

354
8 MOTION CPU MEMORY STRUCTURE
8.4 Installing the Operating System Software
Installation procedure using MT Developer2
The procedure used to install the operating system software, or add-on library using MT Developer2 is as follows.
*1 Install the operating system software by screen of MT Developer2. Refer to the following for details.
Help of MT Developer2
Files installed in the Motion CPU module can be compared with files on the personal computer with MT
Developer2.
Start Installation
Set the rotary switch of Motion
CPU module to "A".
Turn ON the Multiple CPU system
power supply.
Turn OFF the Multiple CPU system
power supply.
Start the install of MT Developer2.
Set the connection method between
the personal computer and Multiple
CPU system in the connection settings.
Select the operating system software,
or add-on library to install, and install
it in the Motion CPU module.
Dialog "Installation is completed" is
displayed.
Set the rotary switch of Motion CPU
module to "0".
END
The dot matrix LED display is "INC".
RUN/STOP is ignored.
The operating system software can be
installed normally by dialog display.
Set to normal mode.
Operation in
MT Developer2
*1
Set to installation mode.
Refer to the following for rotary switch.
¢
MELSEC iQ-R Motion Controller User's Manual