Mitsubishi Electric MELSEC iQ-R16MTCPU - Page 307

6 COMMUNICATION FUNCTIONS
6.4 Communication Function via PERIPHERAL I/F
305
6
Communication setting in MT Developer2 side
Set the items on the Transfer Setup screen in MT Developer2 as shown below.
[Online]  [Transfer Setup]
Operating procedure
1. Select [Ethernet Board]
for PC side I/F.
2. Select [PLC Module] for
CPU side I/F. Select the
"Ethernet Port Direct
Connection" on the CPU
side I/F Detailed Setting of
PLC Module screen.
3. Make the setting for Other
Station Setting. Select it
according to the operating
environment.
1.
2.
3.
Select "Ethernet port
direct connection"