Mitsubishi Electric MELSEC iQ-R16MTCPU - Page 310

308
6 COMMUNICATION FUNCTIONS
6.4 Communication Function via PERIPHERAL I/F
Communication setting in MT Developer2 side
Set the items on the Transfer Setup screen in MT Developer2 as shown below.
[Online]  [Transfer Setup]
Operating procedure
1. Select [Ethernet
Board] for PC side I/F.
2. Select [PLC Module]
for CPU side I/F.
Select the
"Connection via HUB"
on the CPU side I/F
Detailed Setting of
PLC Module screen,
and set the Motion
CPU IP address.
3. Make the setting for
Other Station Setting.
Select it according to
the operating
environment.
1.
2.
3.
Select "Connection
via HUB"
Set the IP address
of the Motion CPU