312
6 COMMUNICATION FUNCTIONS
6.5 Vision System Connection Function
System configuration
This section explains the system configuration and precautions for using the Cognex vision system connection function.
Depending on the vision system used, power supply by Power over Ethernet (PoE) may be required.
The Motion CPU's PERIPHERAL I/F does not support PoE, so a PoE power source equipment (PSE) is
required.
Motion CPU
SSCNETµ(/H)
Alignment stage
etc.
Servo amplifier
Ethernet HUB
Dedicated cable
• In-Sight
®
Explorer
• MT Developer2
In-Sight
®
series up to 32 modules
Ethernet cable
To Next Page
Loading...
