Mitsubishi L02CPU

300
(11) Built-in Ethernet Port Setting
Parameters required for using the built-in Ethernet port are set.
(To the next page)
Item
Parameter
No.
Description Setting range Default Reference
IP Address
1016
H
• IP Address: Enter the IP address
of the CPU module.
• Subnet Mask Pattern: Enter the
subnet mask pattern when using
a router.
• Default Router IP Address: Enter
the IP address of the router.
• IP Address: 0.0.0.1 to
223.255.255.254
(00000001
H
to 0DFFFFFFE
H
)
• Subnet Mask Pattern: Blank or
192.0.0.0 to 255.255.255.252
(0C0000000
H
to 0FFFFFFFC
H
)
• Default Router IP Address: Blank or
0.0.0.1 to 223.255.255.254
(00000001
H
to 0DFFFFFFE
H
)
• IP Address:
192.168.3.39
• Subnet Mask
Pattern: Blank
• Default Router IP
Address: Blank
MELSEC-L
CPU Module
User's
Manual (Built-
In Ethernet
Function)