T200 User's Manual SECTION 3: WIRING AND INSTALLATION
PAGE 3-82
3.18 Communications Interface Wiring and Configuration
The T200 provides three serial communications interfaces:-
1. RS232 for communications between one System Motion Controller and one T200
2. RS485 for communications between one System Motion Controller and many T200's
3. CAN for higher bandwidth communications between one System Motion Controller and many T200's (which can
handle motion commands between the System Motion Controller and T200's)
Figure 3.50: T200 Communications Terminals
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
