CAUTION
1. Read Operator's Manual before using machine.
2. Stop tractor engine, lower machine to the ground, place all
controls in neutral, set park brake, remove ignition key and
wait for all moving parts to stop before servicing, adjusting,
repairing, unplugging or fitting.
3. Keep hands, feet, hair and clothing away from moving parts.
4. Do not allow riders.
5. Keep all hydraulic lines, fittings and couplers tight and free
of leaks before using.
6. Install safety locks before transporting or working beneath
components.
7.
Add extra lights and use pilot vehicle when transporting during
times of limited visibility.
8. Use hazard flashers in tractor when transporting.
9. Install safety chain when attaching to tractor.
10. Keep away from overhead electrical lines. Electrocution can
occur without direct contact.
11. Review safety instructions with all operators annually.
FN-D-10122
To Next Page
Loading...
