Motorola GTR 8000 - Page 148

GTR8000BaseRadio
NormallythecomputerisconnectedtotheappropriateLANswitcheitherlocallyorremotely
throughthenetwork.Donotconnectdirectlytoadeviceunlessdownloadingthesoftware
individuallytothatdevice.
b.Startthecomputer.
2OpentheCSSapplication.
3SelectTools→ConnectionCongurationfromthemenu.
Stepresult:TheConnectionScreenappears.
4VerifythatEthernetisselectedintheConnectionTypearea.
5IfconnectedthroughtheLANswitch,specifytheIPaddressforthedeviceintheEthernetSettingsarea.
Dothefollowing:
If...
Then...
KnowtheIPaddressforthedevice.
1.EntertheIPaddressforthedeviceinthe
DeviceIPAddresseld.
2.Continuewithstep6.
TrunkedDevice:DonotknowtheIPaddress,but
knowthesystemidenticationofthedevice(the
zone,site,subsite,anddeviceIDofthedevice).
1.ClickFetchDNSEntrytoopentheDNSIP
AddressCalculationScreendialogbox.
2.SelectthedesireddevicetypefromtheDevice
listbox.
3.EnterthepropervaluesintheZone,Site,
Subsite,andDeviceIDelds.
Someelds,suchasSubsite,do
notallowentriesforsomedevices.
Therefore,selectthedevicerst.
4.ClickOK.
Stepresult:TheDNSinformationofthe
deviceautomaticallyappearsintheDeviceIP
Addresseld.
5.Continuewithstep6.
ConventionalDevice:DonotknowtheIPaddress.
1.Establishaserialconnectiontothedevice.See
4.4.2ConnectingThroughaSerialPortLink,
page4-4.
2.Forabaseradioorcomparator,selectTools→
SetIPAddress/BR_CMPairingNumber.
4-12
6871022P86-A-November2012