Motorola GTR 8000 - Page 152

GTR8000BaseRadio
Whenandwheretouse:
ThisprocedureschangestheSNMPv3congurationandusercredentialsfromCSSonaselecteddeviceinthesite.
Formoreinformationonthisfeature,seetheSNMPv3manual.
DuringinstallationthisisdonethroughanEthernetcableconnecteddirectlytotheEthernetportofthe
device.AfterinstallationthisproceduremaybeperformedfromaremoteCSS.
ProcedureSteps
1ConnecttothedeviceusingConguration/ServiceSoftware(CSS)throughanEthernetportlink.See4.4.4
ConnectingThroughanEthernetPortLink,page4-11.
2SelectSecurity→SNMPv3Conguration→CongureSNMPv3Users(Ethernet)fromthemenu.
Stepresult:TheSNMPv3Login/ConnectiondialogboxappearswithMotoAdminastheselectedSNMPv3
user.
3EntertheappropriateAuthenticationandEncryptionPassphrasesintheelds.
Whenaccessingthedeviceforthersttime,ifthedefaultpassphrasesdonotwork,thepassphrases
mayhavebeensettodefaultvaluesbyadifferentsystemreleaseofsoftware.Seethe"ResetSNMPv3
Conguration(Serial)"screenintheCSSOnlineHelptoresetthepassphrasestothecurrentsoftware
releasedefaults
4Ifconnectingremotelythroughthenetworktoadifferentdevice,entertheDeviceIPAddresseld,asfollows.
Otherwise,continuetoStep5.
If...
Then...
KnowtheIPaddressforthedevice.
1.EntertheIPaddressforthedeviceinthe
DeviceIPAddresseld.
2.Continuewithstep5.
DonotknowtheIPaddress,butknowthesystem
identicationofthedevice(thezone,site,subsite,
anddeviceIDofthedevice)
1.ClickFetchDNSEntrytoopentheDNSIP
AddressCalculationScreendialogbox.
2.SelectthedesireddevicetypefromtheDevice
listbox.
3.EnterthepropervaluesintheZone,Site,
Subsite,andDeviceIDelds.
Someelds,suchasSubsite,do
notallowentriesforsomedevices.
Therefore,selectthedevicerst.
4-166871022P86-A-November2012