MUTOH valuejet 1614 - Page 51

Users Guide ValueJet 1614
51 AP-75790  Rev 1.4 -22/02/2011,
Step 9 : Close the front cover.
ï
N° Name
1 Front cover
The Media type setup menu is displayed on the operation panel.
Step 10 : Press the [+] key or the [-] key to select the type of the loaded media.
Step 11 : Press the [ENTER] key on the operation panel
The media type is set.
Media Initial is displayed on the operation panel and media initial operation starts.
Notes
The printer starts the media initialization without setting the media type when
The [Cancel] key of the operation panel is pressed.
No key operations are performed on the operation panel for 10 seconds.
After media initial operation is complete, Ready to print is displayed on the operation panel and the
display shifts to Normal.
The media is now correctly loaded.