MUTOH valuejet 1614 - Page 57

Users Guide ValueJet 1614
57 AP-75790  Rev 1.4 -22/02/2011,
Step 12 : Perform Micro adjustment printing.
Display the Media feed compensation menu on the operation panel.
Press the [+] key or [] key to select "PF4: Micro Adj. Print".
Press the [Enter] key on the operation panel.
± The operation panel displays "Printing".
± Start Micro adjustment printing.
Ý«®®»²¬ ¿¼¶«-¬³»²¬ ª¿´«»
î
ï
ð
ï
î
After the micro adjustment printing is completed, the operation panel displays "PF4: Micro Adj. Print".
Step 13 : Refer to the illustrations below and check the printing result.
ײ°«¬ ¬¸» ¿¼¶«-¬³»²¬ ª¿´«»
Step 14 : Set up the Micro Adjustment Change.
Press the [+] key or [] key to select "PF5: Micro Adj.Change".
Press the [Enter] key on the operation panel.
± The operation panel displays "Micro: 0pulse".
Press the [+] key or [] key and enter the micro adjustment value according to the printing result in
step 16.
Press the [Enter] key on the operation panel.
± The micro adjustment value is saved.
± The operation panel displays "PF5: Micro Adj.Change".
± The Media feed compensation is complete.