Remote control 14-27
********** End of Header ********** (continued)
From here all figures represent the level referred to the tuned frequency
And are expressed in hundredth of dBm
49 Level Fstart Little Endian 16 bit integer representing the level referred to start
frequency.
50
51 Level Fstart
+Fstep
Little Endian 16 bit integer representing the level referred to start frequency
plus step frequency
52
51 Level Fstart
+2*Fstep
Little Endian 16 bit integer representing the level referred to start frequency
plus 2 * step frequency
52
.... ....... ..........
.... ....... ..........
nn Level Fstop Little Endian 16 bit integer representing the level referred to Stop
frequency
nn+1
The number of levels replied is calculated by the formula 1+(Fstop-
Fstart)/Fstep. However, because of the different approximation in managing
floating point figures, please note that the number of received levels may
slightly differ specially with big difference in (Fstop-Fstart).
It is always possible to terminate a sweep before its natural end by sending
the command SSTP.
To Next Page
Loading...
Need help?
General
