General Information 1-3
1.7 Main Specifications
Table 1-1 lists the PMM 9010 performance specifications.
The following conditions apply to all specifications:
• The ambient temperature shall be 0°C to 40°C
TABLE 1-1 Main Specifications
Frequency range
Resolution
Frequency accuracy
10 Hz to 30 MHz (CISPR-16-1-1 Full-Compliance
from 9 kHz to 30 MHz)
0,1 Hz
< 1 ppm
RF input
VSWR
≥ 10 dB RF att.
0 dB RF att.
Attenuator
Pulse limiter
Preamplifier gain
Z
in
50 Ω, BNC fem.
< 1.2
< 2.0
0 dB to 35 dB (5dB steps)
Built in (selectable)
20 dB (after preselector, selectable)
Max input level
(without equipment damage)
Sinewave AC voltage
Pulse spectral density
137 dBuV (1 W)*
97 dBµV/MHz
Preselector
One lowpass filter
Six bandpass filters
< 9 kHz
9 kHz to 150 kHz
150kHz to 500 kHz
500kHz to 3 MHz
3 MHz to 10 MHz
10 MHz to 20 MHz
20 MHz to 30 MHz
IF bandwidth
Standard 3 dB
CISPR 16-1-1 bandwidth (6 dB)
MIL-STD-461 (option)
3, 10, 30, 100, 300 kHz
0.2 and 9 kHz
10, 100 Hz, 1, 10 kHz
(*) with MIN ATT ≥ 10 dB
To Next Page
Loading...
Need help?
General
