NARDA PMM 9010 Series - Main Specification

15-4 9010F Fast
15.1.5 Main
Specifications
Table 15-1 lists the PMM 9010F performance specifications.
The following conditions apply to all specifications:
• The ambient temperature shall be 0°C to 40°C
TABLE 15-1 Main Specifications
Frequency range
Resolution
Frequency accuracy
10 Hz to 30 MHz (CISPR-16-1-1 Full-Compliance
from 9 kHz to 30 MHz)
0,1 Hz
< 1 ppm
RF input
VSWR
≥ 10 dB RF att.
0 dB RF att.
Attenuator
Pulse limiter
Preamplifier gain
Z
in
50 Ω, BNC fem.
< 1.2
< 1.6
0 dB to 35 dB(5dB steps)
Built in (selectable)
20 dB (after preselector, selectable)
Max input level
(without equipment damage)
Sinewave AC voltage
Pulse spectral density
137 dBµV (1 W)*
97 dBµV/MHz
Preselector
One lowpass filter
Six bandpass filters
< 9 kHz
9 kHz to 150 kHz
150 kHz to 5670 kHz
5.67 MHz to 11.19 MHz
11.19 MHz to 16.71 MHz
16.71 MHz to 22.23 MHz
22.23 MHz to 30 MHz
IF bandwidth
6 dB bandwidth
CISPR 16-1-1 bandwidth (6 dB)
6 dB bandwidth (with 9030, 9060 and 9180)
1, 3, 10, 30, 100, 300 kHz
0.2 and 9 kHz
10, 100 Hz and 1, 10 kHz (MIL-STD-461)
(1)
120 kHz and 1 MHz (CISPR 16-1-1)
(1)
100 kHz and 1 MHz (MIL-STD-461)
(1)
(*) with MIN ATT ≥ 10 dB