General Information 1-1
1 – General Information
1.1 Documentation
Enclosed with this manual are:
• a service questionnaire to send back to NARDA in case an equipment
service is needed
• an accessories checklist to verify all accessories enclosed in the
packaging.
1.2 Operating
Manual Changes
Instruments manufactured after the printing of this manual may have a
serial number prefix not listed on the title page; this indicates that
instruments with different Serial Number prefix may be different from those
documented in this manual.
1.3 Introduction
to PMM 9010
PMM 9010 is a powerful EMI receiver, fully CISPR 16-1-1, to measure
conducted and radiated interferences from 10 Hz up to 30 MHz, or even up
to 3/6/18 GHz when matched with PMM 9030/9060/9180 extension unit
(optional). All measurements performed by the PMM 9010 are according to
the most accepted standards like: IEC, CISPR, EN (EuroNorm), FCC,
VDE,..
Thanks to its built-in tracking generator, PMM 9010 is also suitable for
designing, characterizing and testing RF filters, transducers and other
components.
The PMM 9010 has been designed adopting an innovative philosophy
made possible only in the recent years by the availability of superior
technology components. This equipment is fully digital but the input
preselector and attenuator – and, of course, the output stage of the internal
reference tracking generator - and therefore combines into a pure EMI
Receiver and Signal Analyzer the precision and accuracy of a numeric
approach, with flexibility and user friendly approach typical of a modern
instrument.
Document 9010EN-81037-2.57 - © NARDA 2018
To Next Page
Loading...
Need help?
General
