CHAPTER 3 SYSTEM DATA PROGRAMMING
ā 113 ā NWA-008853-001 Rev.3.0
97ch3001.fm
Example 2: Inter-Tenant Connection for Incoming Call Termination
For the inter-tenant connection between Trunk C (Office A) and Station B (Office B), the data assignment
at Office B is as follows.
NOTE: The inter-tenant restriction between Trunk B and Station B (CM63 Y=2) is ineffective.
Command Code 1st Data 2nd Data
CM63 Y=2 01 02
01: Tenant No. of Called Station
(Station B)
02: Tenant No. of Trunk (Trunk C)
1: Allow
NO. 7 CCIS
TRUNK B
STA. B
TENANT NO.
TENANT NO.
OF TRUNK C: 01
OF STA. B: 02
TRUNK ATRUNK C
OFFICE
B
OFFICE
A
DIGITAL CCIS PROGRAMMING
To Next Page
Loading...
