NEC NEAX 2000 IPS - Page 187

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 173 – NWA-008853-001 Rev.3.0
97ch3002.fm
Programming
DESCRIPTION DATA
Assign the Digital Announcement Trunk card
number to the required LEN.
(For Intercept Announcement only.)
NOTE: The Digital Announcement Trunk
card number must be assigned to the
1st LEN (Level 0), the 3rd LEN
(Level 2), the 5th LEN (Level 4), and
the 7th LEN (Level 6) of each LT
slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/PIM1: EB002-EB031
For PIM2/PIM3: EB032-EB063
For PIM4/PIM5: EB064-EB095
For PIM6/PIM7: EB096-EB127
NOTE: EB000 and EB001 are dedicated
to built-in Digital Announcement
Trunk of the MP card.
Assign Service Restriction Class A to the re-
quired stations.
(For Intercept Announcement only.)
•
(1)
(2)
Y=02
X-XXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction
Class A
Allow Digital Announcement Trunk access in
Service Restriction Class A assigned by CM12
Y=02.
(For Intercept Announcement only.)
•
(1)
(2)
Y=33
00-15: Service Restriction Class A
assigned by CM12 Y=02
1 : Allow
Set the function to each Digital Announcement
Trunk accommodated into the system.
(For Intercept Announcement only.)
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk No.
(EB002-EB127)
0A00: Call Forwarding-Intercept An-
nouncement
Assign a destination for the intercepted call for
each tenant.
•
(1)
(2)
Y=07
00-63: Tenant No.
EB000-EB127 : Digital Announcement
Trunk Card No.
X-XXXXXXXX: Station No.
E000 : Attendant Console
START
CM10
CM12
CM15
CM49
CM51
A
CALL FORWARDING-INTERCEPT-CCIS