CHAPTER 3 SYSTEM DATA PROGRAMMING
– 174 – NWA-008853-001 Rev.3.0
97ch3002.fm
Operating Procedure
No manual operation is required once this feature has been programmed in system data.
DESCRIPTION DATA
To record, replay, or delete a massage, assign
the appropriate Digital Announcement Trunk
Card access codes.
(For Intercept Announcement only.)
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Digital Announcement Trunk access
(Record)
A101: Digital Announcement Trunk access
(Replay)
A102: Digital Announcement Trunk access
(Delete)
A
CM20
END
CALL FORWARDING-INTERCEPT-CCIS
To Next Page
Loading...
