CHAPTER 3 SYSTEM DATA PROGRAMMING
– 199 – NWA-008853-001 Rev.3.0
97ch3003.fm
DESCRIPTION DATA
Provide the system with Centralized Billing-
CCIS for Center Office.
(1)
(2)
368
0: To provide
Not provide the system with Centralized Bill-
ing-CCIS for Local Office.
(1)
(2)
378
1: Not provided
Assign the second data to 1 (Distant end is a
Local Office) to each CCIS channel.
•
(1)
(2)
Y=03
0-7: CCIS channel No.
1: Distant end is Local Office
Invalidate the data for sending detail informa-
tion on tandem calls to SMDR.
(1)
(2)
76
0: Not sent
Specify the direction for sending of billing in-
formation from the Local Office.
(1)
(2)
239
1: SMDR terminal set to “4” by
CMD001>80/100/120/140
2: SMDR terminal set to “5” by
CMD001>80/100/120/140
Provide the direction of billing information
which received from Local Office.
[Series 3400 software required]
•
(1)
(2)
Y=01
06
3 : PN-AP00-B with AP00 program
Specify PN-AP00-B with AP00 program as
the destination to send an MP call information.
[Series 3400 software required]
(1)
(2)
03
7: Not sent
A
CM08
INITIAL
CMA7
CMD000
CMD001
CM04
B
CENTRALIZED BILLING-CCIS
To Next Page
Loading...
