NEC NEAX 2000 IPS - Page 229

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 215 – NWA-008853-001 Rev.3.0
97ch3003.fm
DESCRIPTION DATA
Assign the Charging Class number for AT-
TCON/DESKCON number.
•
(1)
(2)
Y=32
0-7: ATTCON No.
00-15 : Class No.
Specify the direction for sending detail infor-
mation on C.O./Tie Line outgoing calls from
the Local Office.
(1)
(2)
XX 04: Send detail information of C.O./
Tie Line outgoing calls to the
SMDR
XX : Service Class No. assigned by
CM12 Y=45/CM60 Y=32
1: To send
Specify the direction for sending detail infor-
mation on C.O./Tie Line incoming calls from
the Local Office.
(1)
(2)
XX 08: Send detail information of C.O./
Tie Line incoming calls to the
SMDR
XX : Service Class No. assigned by
CM12 Y=45/CM60 Y=32
1: To send
Assign the originating office number, if re-
quired.
See Example 4: Data Assignment of CMA7
Y=06 and CMDD03>55. Page 242
(1)
(2)
55
0-9999: Originating Office No. NOTE
Assign the billing office number, if required.
NOTE: If using a leading digits of 0 and 0 is
required to print at the SMDR termi-
nal, assign “A” for each leading 0
to be printed.
If the leading digits 0 is not required
to print at the SMDR terminal, as-
sign “0”.
See Example 5: Data Assignment of
CMDD03>56. Page 243
(1)
(2)
56
0-9999: Billing Office No. NOTE
Provide the SMDR service for outgoing calls
to the required station.
•
(1)
(2)
Y=06
X-XXXXXXXX: Station No.
1: To provide
B
CM60
CMDD04
CMDD03
CM13
C
CENTRALIZED BILLING-CCIS