NEC NEAX 2000 IPS - Page 245

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 231 – NWA-008853-001 Rev.3.0
97ch3003.fm
Centralized Billing Programming Steps for Pattern 1
SMDR 0 Using Port 0
Local Office A, B uses AP00.
CENTER OFFICE LOCAL OFFICE A/B
CM05 Y=0>XX : 45 (AP00) 45 (AP00)
CMDD99>0000 : CCC (Data All Clear) CCC
CMDD00>3 : 1 (Center Office) 0 (Local Office)
CMDD02>0
>1
>2
: 0 (Not record)
: No. of call record for SMDR 0
: 0 (Not record)
Desired setting
Desired setting
No. of call record Local Office
CMDD98>0000 : CCC CCC
CM08>800
>368
>378
: 1 (AP00)
: 0 (Center Office)
: 1 (Not Local Office)
1
1 (Local Office)
0 (Not Center Office)
CMA7 Y=03>0 : 1 (Distant Office is Local Office) 0 (Distant Office is Center Office)
=04>0 : NONE Point Code of Center Office
CMDD01>239
CM04 Y=01>09
>06
>03
CMDD01>100
CMDD10>000
>001
>002
>003
>004
>005
>006
>010
: 1 (SMDR 0)
: Desired setting
: 3 (AP00 with MRCA program)
: 2 (AP00 with MRCA program)
: 3 (SMDR with NEAX 2400 IMS Format)
: 1 (SMDR 0)
: Data Speed (Port 0)
: Stop Bit (Port 0)
: Data Length (Port 0)
: Parity (Port 0)
: 48 (Port 0)
: UA (Port 0)
: 0 (Port 0)
0 (Not Centralized Billing Office)
Desired setting
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
CM12 Y=45 : XX (Station Class No.) XX (Station Class No.)
CM60 Y=32 : XX (Class No.) XX (Class No.)
CMDD04>XX00
>XX02
>XX04
>XX08
>XX06
>XX07
: 1 (C.O./Tie Line outgoing calls to SMDR0)
: 0 (C.O./Tie Line outgoing calls to SMDR1)
: Default
: Default
: 1 (C.O./Tie Line incoming calls to SMDR0)
: 0 (C.O./Tie Line incoming calls to SMDR1)
Default
Default
1 (C.O./Tie Line outgoing calls to
SMDR)
1 (C.O./Tie Line incoming calls to
SMDR)
Default
Default
CMDD00>0 : Desired setting Desired setting
CM13 Y=06 : 1 (To provide) 1
CM35 Y=14 : 1 (To provide) 1
CM35 Y=44 : Desired setting Desired setting
CM35 Y=49 : 0 (To provide) 0
CENTRALIZED BILLING-CCIS