CHAPTER 3 SYSTEM DATA PROGRAMMING
– 311 – NWA-008853-001 Rev.3.0
97ch3005.fm
Hardware Required
Paging trunk (PN-4COT) × n/4 (n: Number of external paging zones)
DK card
Paging equipment provided locally.
For cross connection of the Paging Equipment, refer to the Installation Procedure Manual.
Operating Procedure
To access paging equipment through CCIS:
1. Lift the handset and receive dial tone.
2. Dial the paging feature access code.
3. The connection to paging equipment is established.
PAGING ACCESS-CCIS
To Next Page
Loading...
