CHAPTER 3 SYSTEM DATA PROGRAMMING
– 330 – NWA-008853-001 Rev.3.0
97ch3005.fm
DESCRIPTION DATA
•
(1)
(2)
Y=03 Night Mode Destination
Same as CM58 Y=02
09: LDN Diversion-Outside
(Assigned by CM58 Y=09)
Assign the Abbreviated Code for System
Speed Dialing to terminate the Satellite Office
via CCIS by DID in Day Mode and Night
Mode, respectively.
•
•
(1)
(2)
Y=08 Day Mode
Y=09 Night Mode
Same as CM58 Y=02
CXX
XX: Abbreviated Code for System Speed
Dialing Assigned by CM71>66
Assign the System Speed Dialing memory area
exclusively for LDN Diversion-Outside.
(1)
(2)
66: Exclusive for LDN Diversion-Outside
XXX YYY
XXX: 000-299 (Starting Memory Slot No.
in Block)
YYY: 001-300 (No. of Slots to be
assigned in Block)
NONE : No data
Set the stored number into the Memory Slot
number allocated by CM71.
•
(1)
(2)
000-299: Memory Slot No.
XXXX YY...Y
XXXX: Access Code (Maximum 4 digits)
: Separator Mark
YY...Y : Calling Party’s No.
(Maximum 26 digits)
Specify the combination of Trunk Routes al-
lowing a Tandem connection.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route for
CCIS)
0: Allow
A
CM58
CM71
CM72
,
,
CM36
END
JANUARY/31/2006
TRUNK ANSWER FROM ANY STATION-CCIS
To Next Page
Loading...
