NEC NEAX 2000 IPS - Page 359

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 345 – NWA-008853-001 Rev.3.0
97ch3005.fm
DESCRIPTION DATA
Specify the use of Record key assigned by
CM90 Y=00: F5026 for Voice Mail Live
Record-CCIS.
(1)
(2)
578
0 : Used as Record key and End key
1 : Used as Record key
Specify the Mail Box number to hear a mes-
sage when the Play key for Voice Mail Live
Record-CCIS is pressed while seizing a Sub
Line.
(1)
(2)
675
0 : Mail Box number for My Line
1 : Mail Box number for Sub Line
Specify sending of confirmation tone from the
VMS to the calling and called party while
Voice Mail Live Record-CCIS is executed.
(1)
(2)
579
0: To send
1: Not sent
Specify a kind of MSG displayed on the D
term
.
NOTE: In this feature, regardless of the
number of accumulated messages, X
is always 1.
(1)
(2)
025
0: MSG (only)
1 : MSG X (X: No. of messages)
Assign the System Speed Dialing memory area
used exclusively for Voice mail station num-
ber.
NOTE: This memory area is shared with
Route Advance feature from Tie line
to C.O. line. Therefore, assign the
area as little as possible.
(1)
(2)
66: Exclusive for Voice mail station No.
XXX YYY
XXX: 000-299 (Starting Memory Slot No.
in block)
YYY: 001-099 (No. of Memory Slots to be
assigned in block)
Assign the Voice mail station number to the
memory slot number in slot allocated by
CM71.
NOTE: If the Voice mail station number is
set in open numbering system, you
should set “Access Code + Area
Code of the Voice mail station + the
Voice mail station number”.
•
(1)
(2)
Y=0
001-099: Memory Slot No. in block
XXXX YY...Y
XXXX: Access Code (Maximum 4 digits)
: Separator Mark
YY...Y : Voice mail station No.
(Maximum 8 digits)
Assign the abbreviated code of Voice mail sta-
tion number for the Voice Mail Live Record-
CCIS.
•
(1)
(2)
Y=10
0
00-99 : Abbreviated code
NONE : No data
A
CM08
CM71
CM72
,
,
CM50
END
JANUARY/31/2006
VOICE MAIL LIVE RECORD-CCIS