CHAPTER 2 INSTALLATION
– 72 – NWA-008853-001 Rev.3.0
97ch2001.fm
STEP3: Secure the PZ-M542/PZ-M557 card to the PIM CARD STOPPER with one screw.
NOTE 1: Screw is attached to the PZ-M542/PZ-M557 card.
NOTE 2: Before securing the PZ-M542/PZ-M557 card to the PIM CARD STOPPER, all the cards should
be mounted on the card slots and the PIM CARD STOPPER should be secured with screws. For
installation of the PIM CARD STOPPER, refer to the Installation Procedure Manual, CHAP-
TER 2, “MOUNTING CIRCUIT CARDS”.
Mounting of PZ-M542/PZ-M557 Card
SCREW
PZ-M542/PZ-M557
CARD STOPPER
INSTALLATION PROCEDURE FOR DIGITAL CCIS
To Next Page
Loading...
