NEC NEAX 2400 ICS - Page 140

NEAX2400 ICS Business Features and Specifications
Page 110
NDA-24143, Issue 4
C-5D Call Forwarding - All Calls - D
term
Service Conditions (cont’d)
4. If Station A sets Call Forwarding to Station B, and Station B is set for Call Forwarding to Station
C, calls to Station A will be forwarded to Station B but will not be routed to Station C, unless
MULTIPLE CALL FORWARDING - ALL CALLS [M-44] has been set in System Data.
5. This feature can only be set from the MY Line or sub-line.
6. This feature may also be accessed via the dial pad or SPEED CALLING-ONE TOUCH [S-26D].
If this feature is accessed via the dial pad, it must also be cancelled via the dial pad.
7. A station user may set CALL FORWARDING - ALL CALLS - D
term
for a multi-line appearance
based on the CLASS OF SERVICE - INDIVIDUAL [C-15] assigned to the station setting the
service. Below, are simplified key sheet assignments for stations 200 & 201. The CLASS OF
SERVICE - INDIVIDUAL [C-15] for station 200 is allowed CALL FORWARDING - ALL CALLS -
D
term
, but the CLASS OF SERVICE - INDIVIDUAL [C-15] for station 201 is not. Station 200 is
able to set CALL FORWARDING - ALL CALLS - D
term
for station 201. The associated feature
button LED on station 201 will illuminate.
Station 200 Station 201
FWD FWD
Note:
“FWD” key is same as the CALL FORWARDING - ALL CALLS feature key.
8. This feature is applicable to CALL FORWARDING - ALL CALLS - OUTSIDE [C-28] and CALL
FORWARDING and MULTIPLE CALL FORWARDING - ALL CALLS - CCIS [C-45] [M-40].
9. The display of an intermediate station on a D
term
's LCD panel may be allowed or denied
according to System Data. This assignment is done on a system basis. The LCD displays:
Intermediate Station Calling/Called Party
D
term
Series E
10. When the station user setting CALL FORWARDING - ALL CALLS goes off-hook, the SPDT can
be provided instead of Dial Tone. (Activation of this service is determined in the System Data.)
11. When a destination of CALL FORWARDING - ALL CALLS - D
term
has already been assigned,
even if the feature is restricted by the new office data or changing of Day/Night mode, the
assigned data can still be used or cancelled.
MULTI-LINE MY LINE MULTI-LINE MY LINE
201 200 200 201
FDA XXXX XXXX
(Time Display)
CF ALL XXXX
XXXX
(Time Display)