NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 133
Call Waiting - Terminating C-12
Service Conditions (cont’d)
8. CALL WAITING - TERMINATING cannot be activated while in the CONSULTATION HOLD
[C-17] mode.
9. CALL WAITING - TERMINATING cannot be used in conjunction with DIAL ACCESS TO
ATTENDANT [D-2].
10. CALL WAITING - TERMINATING cannot be activated if the target station has accessed,
entered, or is engaged in any of the following features or modes:
ATTENDANT CAMP-ON WITH TONE INDICATION[A-1]
ATTENDANT OVERRIDE [A-7]
BOSS - SECRETARY OVERRIDE - D
term
[B-5D]
BUSY VERIFICATION [B-3]
CALL BACK [C-1]
CALL HOLD [C-6, C-6D]
CALL TRANSFER [C-10, C-11, C-11D]
CALL WAITING - ORIGINATING [C-31]
CONSULTATION HOLD - ALL CALLS [C-17, C-17D]
DATA LINE SECURITY [D-12]
DATA PRIVACY ON DEMAND [D-17]
DIAL ACCESS TO ATTENDANT [D-2]
EXCLUSIVE HOLD - D
term
[E-4D]
EXECUTIVE RIGHT-OF-WAY [E-1]
LINE LOCKOUT [L-3]
MODEM POOLING [M-21]
NON - EXCLUSIVE HOLD - D
term
[N-7D]
OUTGOING TRUNK QUEUING [O-2, O-2D]
PRIVACY - D
term
[P-14D]
PRIVACY RELEASE [P-18]
THREE-WAY CALLING [T-2, T-2D]
VOICE CALL - D
term
[V-2D]
11. The following service features take precedence over CALL WAITING - TERMINATING:
CALL FORWARDING - ALL CALLS [C-5]
CALL FORWARDING - BUSY LINE [C-3]
STATION HUNTING - CIRCULAR [S-7]
STATION HUNTING - SECRETARIAL [S-8]
STATION HUNTING - TERMINAL [S-9]
Interactions
1. This feature is allowed whenever the destination telephone set is in any state other than:
a.) Engaged in three-way connection,
b.) A PRIVACY feature is activated,
c.) Connected to a route programmed to have Line/Trunk, Privacy, CDN 44:PRV,
d.) Listening to a tone (Dial Tone, Reorder Tone, Service Set Tone, Busy Tone, Ringback
Tone).
e.) Connected to the Attendant Console.
2. To answer a CALL WAITING-TERMINATING call, System Data 2, Index 1, Bits 0 & 1,
CONSULTATION HOLD [C-17]; assign data “11” to allow CONSULTATION HOLD.
To Next Page
Loading...
