NEAX2400 ICS Business Features and Specifications
Page 170
NDA-24143, Issue 4
C-60 Call Forwarding - Busy Line - Outside
Service Conditions (cont’d)
7. CALL FORWARDING - BUSY LINE - OUTSIDE can be restricted by the RSC of the originating
station.
8. ROUTE PEG COUNT [P-7] is used for CALL FORWARDING - BUSY LINE - OUTSIDE.
9. This feature can be restricted according to the D
term
MY Line service restriction class. Incoming
CALL FORWARDING - BUSY LINE - OUTSIDE calls to the D
term
multi-line cannot be transferred
if the service restriction class of the D
term
MY Line restricts this feature.
10. A maximum of 8 digits including trunk access code can be stored.
11. There is no limit to the number of stations which may activate this feature simultaneously.
12. Restriction for outgoing connection by CALL FORWARDING - BUSY LINE - OUTSIDE are as
follows:
a.) When originating a call from a station, Route Restriction data assignment is verified
when this service is in effect.
b.) When originating a call from a trunk Restriction for Tandem connections between the
incoming trunk and the outgoing trunk selected for the call where CALL FORWARDING -
BUSY LINE service occurs.
13. When a caller places a call via OGCA (Outgoing Call Alternative) and when the first outgoing
route and the calling party are restricted, this service cannot be set. In this case, the service can
be set via the following procedure:
a.) assign a dummy route,
b.) clear the restriction between the dummy route and all the stations, and
c.) assign the dummy route as the first route of OGCA.
14. When a destination of CALL FORWARDING - BUSY LINE - OUTSIDE has already been
assigned, even if the feature is restricted by the new office data or changing of Day/Night mode,
the assigned data can still be used or cancelled.
D
term
My Line Service
Restriction Class
D
term
Multi-Line
Service Restriction
Class
Activation from D
term
Multi-Line
Remarks
Non-Restricted Non-Restricted Possible
Restricted
Restricted
Not PossibleNon-Restricted
Restricted
To Next Page
Loading...
