NEAX2400 ICS Business Features and Specifications
Page 340
NDA-24143, Issue 4
M-26 Message Center Interface
Operating Procedure (cont’d)
5. The external CPU, upon receiving retrieved message information, will transmit a data record
requesting the NEAX2400 ICS to extinguish the Call Indicator Lamp of the corresponding
station.
Service Conditions
1. The call type is sent to the external CPU via the MCI interface, this call record will pertain to the
following services:
ATTENDANT CAMP-ON [A-1]
AUTOMATIC RECALL [A-8]
CALL FORWARDING - DON'T ANSWER [C-3]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - ALL CALLS [C-5]
Call returned from Hold
CALL TRANSFER - ALL CALLS
(Note)
[C-11]
CENTRALIZED ATTENDANT SERVICE (CAS) [C-20]
DIAL ACCESS TO ATTENDANT [D-2]
DID to the Specific UCD Group
DIT to the Specific UCD Group
Intercept Call to the Attendant
INTER-POSITION TRANSFER [I-5]
LDN call
OFF-HOOK ALARM [O-6]
Recall
Recall from a Series Call
Series Call Re-Entry
Tandem Transferring/Hold Entry
Note:
Available for interoffice station transfer calls only.
2. The NEAX2400 ICS MESSAGE CENTER INTERFACE [M-26] can control the display of a D
term
for Message Indication; “MW” in a Message Center application.
3. If an ATTENDANT CONSOLE [A-3] calls a UCD [U-1] group directly, for Feature 2, the
NEAX2400 ICS will not generate a call record to the MCI.
VOICE
MAIL
SYSTEM
ANALOG
STATION
LINE
MESSAGE CENTER
MESSAGE
CENTER
COMPUTER
UCD
MESSAGE
CENTER
INTERFACE
NEAX2400 ICS
UCD
MESSAGE
CENTER
INTERFACE
NEAX2400 ICS
To Next Page
Loading...
