NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 341
Message Center Interface M-26
Service Conditions (cont’d)
4. If the Host/CPU malfunctions and stops collecting call records, the NEAX2400 ICS can store up
to 15 call records. If the maximum of 15 call records is stored and a 16th is generated, the system
will write over the oldest stored record, thus giving the stack the most recently generated call
records.
5. MCI data will not be output when a hotline station is terminated to a station that is forwarded to
a Voice Mail System.
6.
(Series 6200 software enhancement)
It can be determined on a UCD group basis whether to
send the incoming call information of the call terminating to a station in the UCD group to the
message center CPU. When OVERFLOW - UCD [O-7] is activated, the MCI operation of the
overflow UCD group is followed.
7. When the calling party number is received via the C.O. line/ISDN line/CCIS line, the number is
sent to the MCI. The calling number is output to the additional MCI text format.
To Next Page
Loading...
