NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 491
Split Call Forwarding S-99
Operating Procedure (cont’d)
To set SPLIT CALL FORWARDING using D
term
feature key:
To set Call Forwarding from an individual station (D
term
):
1. Setting Call Forwarding for an incoming call from a station:
a.) Confirm that the PAGE* (One-touch changeover) lamp is on; if the lamp is off, turn the
lamp on by pressing the PAGE key.
b.) Lift the handset or press the SPKR key; receive Dial Tone.
c.) Press the FWD, FWD-BY, or FWD-DA key; receive Special Dial Tone.
d.) Dial the number of the desired target station; receive Service Set Tone. The following is
displayed on the LCD, when the destination is a station:
D
term
Series E
When the destination is an ATTENDANT CONSOLE, the D
term
displays:
D
term
Series E
When the destination is an outside trunk, The D
term
displays:
D
term
Series E
Also, the FWD, FWD-BY, or FWD-DA lamp turns on.
e.) Replace the handset or press the SPKR key.
FWD SET
XXXXX
(Time Display)
FORWARD SET
XXXXX
(Time Display)
FWD SET OPR
(Time Display)
FORWARD SET OPR
(Time Display)
FWD SET
(Time Display)
FORWARD SET
(Time Display)
To Next Page
Loading...
