NEAX2400 ICS Business Features and Specifications
Page 492
NDA-24143, Issue 4
S-99 Split Call Forwarding
Operating Procedure (cont’d)
*PAGE feature key is a paging button for SPEED DIALING - One-Touch - D
term
[S-26D], (FKY = 55).
2. To set Call Forwarding for an incoming call from an outside party:
a.) Confirm that the PAGE (One-Touch Changeover) lamp is off; if the lamp is on, turn the
lamp off by pressing the PAGE key.
b.) Lift the handset or press the SPKR key; receive Dial Tone.
c.) Press the FWD, FWD-BY, or FWD-DA key; receive Special Dial Tone.
d.) Dial the number of the desired target station; receive Service Set Tone. The following is
displayed on the LCD when the destination is a station:
D
term
Series E
When the destination is an Attendant Console, the LCD displays:
D
term
Series E
When the destination is an outside trunk, the D
term
displays:
D
term
Series E
To cancel Call Forwarding from an individual station (D
term
):
1. Cancelling Call Forwarding for an incoming call from a station:
FWD SET XXXXX
(Time Display)
FORWARD SET XXXXX
(Time Display)
FWD SET OPR
(Time Display)
FORWARD SET OPR
(Time Display)
FWD SET XXXXX
(Time Display)
FORWARD SET
(Time Display)
To Next Page
Loading...
