NEC SL1100 - Figure 2-88 Installing the CF Card

• When installing a compact flash card onto the VMDB the system MUST be
powered off. Never install or uninstall the compact flash card while the
system is under power.
1. Turn off the system power and disconnect AC cord.
2. Remove the CPU card and insert the compact flash card into the CF slot (CN2).
CF card
CF Slot (CN2)
CPU card
VMDB
Figure 2-88 Installing the CF Card
3. Reinstall the CPU card into the 084M-B1 mother board, and close the CPU Support making sure
tab A locks into place.
SL1100 ISSUE 5.0
2-64 Installation